Відео

you showed zero steps in the process. not helpful at all.

Is there any chance to use illuminated star light only during the night?

What tool do I need to take out the oil filter?

All these honda engines knock. Absolute junk😂

Thanks for the great video. used it to install without a hitch

How to check oil life?

Thank you 🙌

LOL....yeah...I found you lookin for "How to remove 2004 NIssan sentra Relay/Fuse Box....because of this exact same issue. I can't get my darn radiator out because of that Relay Box and can't figure how to Remove it without breaking something.....FRUSTRATING! Anyone got any ideas on how to remove that Relay box?

Thank you! This was my problem . Brake light on dash , a/c blowing hot, power doors wouldn’t lock electrical. No key chime. I ordered the part online from local Honda dealer , took less than a hour to swap. This fixed everything ! Thank you

This is a great way to drain your battery. Those fuse locations have constant power, light will remain on even if vehicle is turned off.

take a look at the thread length on your old plugs versus the new one!!! please tell me you didnt put those new ones in the engine - that they were for demo purposes only ... and yes, the NGK or Denso plugs should be used - if they go 60-100K miles they are worth their price

Thank you for making this, short and simple and easy to follow. Changed my oil for the first time ever by myself with this video as a guide lol.

How you show everything but the the final step?!!

Last time I checked that's not the intake variable valve timing sensor?? That's a crack sensor??? The vet sensor is another one

Watching from France..You see the two yellow 20 fuses are good but no current underneath on the upper fuses box near the relay.How to solve this problem Sir..Thanks so much Sir..Hope to have an answer with you..

Yeah..why don't you just GO AHEAD and remove that 😅

Did you even notice that there's a 3/8" piece right on the filter housing? You don't even need the removal tool, just a 3/8" extension. You can see it clearly at 3:34. Also put your o ring on before you put the filter in 🤦

THANK YOU

How long did the repair last for?

Hey David, I’m trying to figure out if I have a check engine, light or service engine light soon I was told my check engine lightbulb is not working and I cannot find it anywhere in the dash

Hey, I’m trying to locate the check engine light on this car. I was told the bulb is burned out, but the only thing I see is service engine soon.

I have the same valve like your, but I have a little leak every 10-15 minutes ,but fron the shower head, you think that I have to change just the cartridge . Thanks

Question: at about 5:00 into the video, when you removed the transmission fluid hose at the bottom, how much transmission fluid did you lose? Is there still transmission fluid in the radiator? Did you have to add transmission fluid back after the job was completed due to fluid loss? If so, how much? Thank you for your help!

Hard to endure this video. The lack of cleanliness is just insane! The grime and contaminants from the ground applied to the surfaces are hair-raising knowing what you're introducing to the outstanding quality of the Toyota and it's VERY fine internal tolerances. Yes, the filter was incorrect and it begs the question, why would you NOT use the Toyota brand filter when it's probably less expensive than the crappy one you used which is incorrect and why didn't you bother to clean that oil filter housing? I'm guessing that funnel was also grimy. Appreciate that you took the time to make the video, but man, this is more a tutorial about how NOT to do an oil change on these amazing cars if you really want yours to last. Yikes!

Also... should change inline transmission filter after 3rd fluid change.

Honda states that engine should be at operating temp. with engine NOT running to check level if transmission fluid.

Thank you for the video sir helped me a lot!

Dude. Thank you. You saved me $100. Mechanic told me to replace the “actuator motor” of the thermostat. Lol.

The filter element you removed does not look like the one you installed.

Why does the shifter area from this one look way different?? Are you sure this isnt like a 1999 ? Or is this the GLE 2002 ?

Hey @RodeoCowboy I have an 06 1.8l I drained and fill but I wanted to ask since you had ur Sentra longer how is the shifting for you? Is it a little hard sometimes from 1st to 2nd ? Idk if it’s my mounts or transmission but sometimes it shifts hard sometimes it shifts perfectly smooth I have about 102k miles

Thanks for the tip! Would love to see a video of the actual replacement process.

Thank you so much! I had no working door locks, no key fob working, no dome light when door was open, no chime when key in ignition, no cold a/c, brake light on, and your video was spot on the issue! I DID go to a junk yard and got the part. 1 hour to take off salvaged car, 2 hours to put on my car. But as soon as I turned on the key, I heard chimes and my brake light went off. Locks started working and dome light came on. Key fob works too now. Great video, thanks again! David

Thank you you fixed my problem mechanics couldn't

Dex 2 no longer available

Who does not mention the size of the socket for the spark plugs

Sounds like the birds were helping you change the oil 😂

Does this fit e350 2011

Toxic as comment man, good job man, save you 40 bucks and some headache rather then taking it to the shop

When you didn't use a funnel for adding oil to the engine and slopped it like the 3 stooges might do, I gave this video a big fat thumbs down! Better luck next time!

This work for 2001 Nissan Sentra se sir ??

Good presentation.

My renger 2008 when I pass 50 miles the OD starting BLINKING. On and off. Any recommend

What's up with the screen man

No need to break the bracket off. Just insert a thin screwdriver on the 3 wire side where the grey harness meets the black bracket and it will unclip it and slide right off. You can see a small long rectangle opening where to insert the screwdriver.

Thanks for the video. So did you pass smog after changing the O2 sensor?

Thank you for the video. as the other video mentioned, i those are the cams shaft and below is the crankshaft. the part looks exactly the same.

Are you really sure that's the Crankshaft position sensor? These other two videos show it in a much harder place. ua-cam.com/video/JuADcdQONzg/v-deo.html or ua-cam.com/video/CClrohQpxvA/v-deo.html

That's not clock wise, is it?

Nd one question would smog test fail if it’s black oil or should I do put fresh oil before or after